Tag Archives: Rockler

A review of the Rockler Dust Right quick release hose and fittings…

7 Mar

I’ve had the Rockler Dust Right hose and fittings attached to my dust collector for several months now. Here is my experience so far with the product.

The need…

Space in my shop is tight at 8’x16′. As I was setting up my shop my eyes kept wandering over to a pile of hose and fittings I’d gotten with my used dust collector.

The pile in question.

I knew I’d have to get around to it soon. The problem was, when I laid out all the lengths of hose in the backyard, I realized there wasn’t nearly enough to run to all of my chip producing machines. I also realized the hose would have to run along the walls and ceiling eating up space. I started to calculate the cost of how much more hose, fittings and time and effort I’d be putting into setting up my dust collection system. I didn’t like the answer. I thought there must be another way…

The solution…

I did some online searching, and perused the tool catalogs I had on hand. This is when I found out about the Dust Right quick release hose and fittings.

This is the hose in it's compressed state, and hooked up to a second hose that runs under my bench and leads to my table saw.

The hose expands, contracts and bends easily. The quick release fittings allow you to switch the hose between any given number of machines quickly and easily provided they have the mating Dust Right fittings in place. This seemed like the perfect solution for a small shop like mine.

The alternative…

In researching this product I did hit my local woodworking supply stores to see if there was an alternative. I did find that stores sell a type of expandable hose by the foot, and there seemed to be some quick release fittings available as well. But the quality and ease of use were a far cry from the Dust Right equivalents judging from Rockler’s  promotional video. I also calculated that the price would be comparable, so why not go for the rockler set.

Setting up the system…

I ended up buying the 3′ hose that extends to 21′ since I’d read in reviews that the 14′ hose seemed too short for most people’s needs. I bought the handle, and 4 dust port fittings for my main machines. Each was on sale, all the better. The kit also came with several keyed hose clamps.I found setting up the system was a breeze. I was so pleased that I sold the old pile of hose and fittings for $40 and have no regrets.

Here are the clamps that come in the kit.

Ease of use…

For the most part the Dust Right system has performed as described by Rockler. I’m very happy with how quick and easy it is to switch from machine to machine. The quick release is the main feature for me. I love it. The extendable hose is also super bendy and therefore is easy to maneuver around the shop.

Here is the quick connect / release in action...

Slides on with a friction fit. Picture a regular machine port instead of the blast gate I have pictured here.

However, I have yet to set up a wall mount docking system for my hose, so when I go to store it I feel like I’m playing with a 21′ slinky. But I plan to remedy this soon, and I don’t find it too much of a nuisance at that. It stores in seconds.

It ain't pretty, but for now this is my way of storing the hose when not in use.

Here are some situations where the system works like a champ:

From the dust collector...

... to the jointer! If I need more foot space I move the hose over a bit. That doesn't seem to be an issue.

Or to the planer!

Again, the hose is nicely out of my foot path. It contours around my work bench neatly.

And to the band saw- by the way in this instance I took a regular 4" fitting and wound masking tape around the fitting until it was built up enough that the dust right handle fit snuggly.

And for the table saw...I connected a regular hose to my table saw since the port was not easily accessible (under my bench)...

It comes out the other end under my bench where I can easily hook up to it .

And here is the dust right hose in place.

The one problem I’ve found with the dust right system…

In the case of my router table hookup, the system doesn’t stay put. I think because I have two reducers involved.

Because I have more than one reducer involved, and they extend past the router table, the fittings don't have much support...

The hose reaches, and the fittings support the weight of the hose until...

Let's see what happens when I turn on my dust collector...

Crash! Because the dust right reducer has a rubber connection leading to the 4" fitting, the weight of the hose, plus the suction of the dust collector cause the rubber part to bend until the two separate- causing a crash.

If there was a more solid connection between the two components of this fitting I think I wouldn't have this problem.

The other issue…

I’ve also found that even though I went with a hose that is 5′ longer than my shop, it’s hard to extend it to the very full length of my shop. Like when my dust collector is on one extreme and I have a machine up against the wall on the other extreme, to pull the hose to the opposite wall of my shop is just possible, but then to hook it up around behind the machine against that wall is pretty much going to lead to another crash.

Yea or nay…

Yea! Everything considered, I’m still absolutely happy with my purchase because of the world of good it’s done for my shop. I appreciate the system every time I use it. I don’t mind working around a few small issues. I’d advise adding about 10′ to the length of your shop then purchasing the length of hose that fits that measurement. Unless you don’t need to reach the extremities of your shop, or you have a limited space to store your hose in the compressed state, you might want to order a shorter hose.

And just to not leave you hanging…

I set up my shop vac for the router table, and mitre saw, in lieu of the dust right system. The shop vac does a wonderful job, so I’m not going to fix what’s not broken.

Thankfully my shop vac lives on the same side of the shop as my router table and mitre saw, and does a great job.

Next I’m going to post a tip on adapting your tape measure, explain my newest tool purchases, and a write few words on my return to the workforce after three months off.

%d bloggers like this: